Everything You Need To Know About Built-Up Roofing

Built-up roofing (BUR), also known as built-up roofing systems, has been around for a long time. You will see these roofing systems installed on flat-roof buildings, but they require the services of commercial roofing contractors to install due to the complexity of the installation. They have been a mainstay of flat and low-sloped roofing systems for decades, and they are a quality option for building owners who seek a durable, long-lasting roofing system at a great price. BUR is a series of panels affixed to the roof with adhesives, bitumen and asphalt is added, and then gravel is layered over the felt panel to ensure a leak-free environment for the users of the structure. Priced economically, buying a BUR can provide up to 40-years of life for any building depending on climate and other factors. At Integrity Roofers, we would like to supply an education on this excellent roofing system by outlining the positive benefits a building owner can derive when evaluating the need for a BUR.

Common Materials Used for BUR
Three components make up a BUR system: reinforced fabric made from felt or ply that comes in sheets for installation, bitumen or asphalt that seal the sheets to the roof, and a layer of gravel to complete the process. A standard installation will see the following material used for the BUR installation.

How Long Does a Built-Up Roofing Last
As mentioned earlier in this article, a BUR can stand tall for a maximum of 40-years, depending on certain factors. If you are in a cold climate – think of a place like the Yukon – you could see a roof last 15-years as BUR is somewhat sensitive to extreme cold. The contractor used for the installation and the number of sheets laid on the roof is another to think about. If the contractor isn’t an experienced hand installing a BUR, your roof may not last as long as you had hoped. And, more is always better when adding sheets to the roof; you are increasing your building’s security from the weather and leaks when using more than a layer or two of BUR materials.

Built-Up Roofing Repairs
Maintenance costs are never far from a commercial building owner’s attention, and when you think about how the roofing system is installed, it might make you wonder if it can be repaired. When spending money, we want value, and true, a BUR roof won’t be around until the end of time; it can be repaired under certain circumstances. The mitigating factor determining repair or replacement is the extent of the roof’s damage. If you aren’t doing periodic maintenance and minor repairs to the roofing system – like anything else – you are setting yourself up for a costly roof replacement because you skimped on maintenance costs. Let’s look at roof damage this way; the type and the degree the roof is damaged will guide you in deciding what your plans will be when evaluating the roofing system. You never want a DIY repair for a BUR system; you need a tried and true roofing contractor. Factors that cause damage to a BUR are UV rays, direct hits from hail or falling branches, rough weather/climate, and poor installation. Common repairs on a BUR are open joints, blistering, waves, and cracks that develop over time. To repair open joints, you need to add concrete under the joint, add pressure to make it stick, and you have one solution. Another solution is to add another layer of felt fixed to the roof with nails and contact cement. To fix a blister, a roofing contractor will cut an incision in the area that has bubbled up, releasing the gas pressure. Then, the felt piece in question will be cut away from the roof, roofing cement will be applied to the open area, and a piece of felt will be applied to close the gap. This step will be repeated to ensure a secure seal for the roof. Waves or undulations are simple repairs that will be easy to effect. Waves usually come from poor installation as the adhesive wasn’t correctly set. The repair is to add more sealant and substrate to the section where the wave is to smooth out that section of the roof. Roofing will crack over time, and there is little to stop the process. But the repair for a crack is easy for a roofing contractor. They clean the area, add a layer of cement, and apply a layer of sealant, then bitumen or asphalt as the final layer of protection.